Wegener UNITY4000 Dokumentacja Pobierz pdf (Strona 36)

Relay Test Menu

This menu allows you to verify input closures and close the relays to verify connections. The

menu item is not listed and is activated by pressing [UP] and [DOWN] at the same time.

Closure Test

1. Press [ENTER] to enter the closure test

2. Press [UP] or [DOWN] to select the relay you want to test

Relay #1 selected, but not activated

3. Press [ENTER] to activate a relay – the box of the selected relay will darken

Relay #1 Activated

4. Press [ENTER] to clear the relay – the box of the selected relay will lighten

5. Press [BACK] to exit the closure test and return to the Settings submenu

When an input closure is closed, the appropriate box goes black and then clears after it is

released.

Input #1 closed, inputs #2 - #4 open

Resetting to Default Closures

When you are in the RELAY TEST menu, you can press [UP] and [DOWN] at the same time

to reset the closure map to its default setting.

Rev. 36 – Firmware version 1.61 36

2008

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 58 59

Brak uwag

Wegener UNITY4000 Dokumentacja Strona 36